Natechrony Variable Adaptor - Small 25-8 mm

A variable adapter for barrels that are not threaded. The variable adapter is simply pushed onto the end of the barrel & tightened in place with the thumb screws. The bore & outer barrel MUST be concentric! Otherwise damage or injury could occur.

The adapters can be adjusted from its maximum diameter down to its minimum. There are 2 sets of inserts which allows the adapters to work all the way down to their minimum diameter, by replacing the inserts. It also saves you from having to purchase two different adapters!

The barrel MUST make contact at FOUR points, as close as possible to the top & bottom of the barrel. If the adapter is making contact at the middle of the barrel mis-alignment can occur.

Thumb screws are aluminium & supplied with either knurled or printed tabs.

Price is for 1 adapter, with 1 set of screws.

The variable adapters require less clearance than our regular slimline adapters, so will work with minimal clearance between the air tank and barrel.