The SteadyShot also has the advanced software with new features:
- Full automatic fire measurement, up to 1,250 shots per second
- Airsoft specific screens
- fps & J, with a rate of fire for each shot
- Pre-programmed & quick change bb weights
- Field mode - quickly check if you're above/below 3 programmed speeds/powers
You can see your movement on each axis via 3 separate graphs:
- Left/Right
- Up/Down
- Back/Forth
You can also view your movement in a 3 dimensional line graph - showing how you moved in space.
All NateChrony adapters are fully compatible with the SteadyShot.
Requirements:
You'll need this stuff to use the NateChrony - typically if you have a mobile phone you're set!
- If using a mobile phone/tablet, it should be less than 5 years old & up to date
- Working knowledge of your device, including browser and internet technologies
- Working knowledge of any additional security software installed on your device
- A 5v standard USB power source
- A device (phone/tablet) that can connect to a Wi-Fi hotspot, that does not have internet access
- A web browser that can connect to a HTTP (not HTTPS) web page and run JavaScript
- You can test your device here, ensure the page loads and displays a speed and power value, and when clicking on Menu - Shoot, you hear the speed and power readout
NOTE: if you have software or settings on your device that does not permit this - you may have issues.
Specifications
- Accuracy: calibrated to be within 1fps of actual pellet speed at 1,000fps from a certified set of master chronographs
- Resolution: <0.1fps shot to shot at 1,000fps
- Weight: 60g/72g (Polymer/Aluminium)
- Save >1,000 shots across 5 save slots
- Max speed: 2,500fps (software limit - can be increased)
- Full export of all raw data to CSV
- Max rate of fire: 1,250 shots per second
- SteadyShot capture time: 0.75-25sec (software config)
- Air powered guns only
- CO2 power can cause vapour, not recommended (long barrels on warm days may be ok, cold barrels on cold days will cause issues)
- Maximum caliber: ~45-50 cal (depending on power)
- Maximum power: 150-200 fpe
Included with the NateChrony SteadyShot:
- The Chronograph: The thing you pop on the end & shoot through
- Premium USB Cable: A quality braided USB-C to USB-A/C cable, with a 90degree connector
- The Software: Standard NateChrony software
- Barrel Adapters: Each NateChrony comes with two 1/2 UNF threaded barrel adapters, to attach it to your rifle
- Soft Case: A carrying pouch to put it in
- Test Pellet: A plastic pellet for the drop test (inside the soft case)
- Phillips Driver: A phillips driver for the adapter grub screw
- Sticker: for maximum accuracy performance
