Meta Description

Meta Title

Pre-Order Qty

Black Friday

Featured

Pre-Order

Sale Item

DETAILS
MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.
SPECIFICATIONS
<ul>
<li>3.055&rdquo; Outside Length</li>
<li>2.870&rdquo; max cartridge overall length (COAL) with binder plate</li>
<li>2.960&rdquo; max cartridge overall length (COAL) without binder plate (see limitations below)</li>
<li>2.52&rdquo; Rear Height</li>
</ul>
COMPATIBILITY
These magazines will need to be slightly modified to function with Howa 1500 SA rifles.
<ul>
<li>308WIN</li>
<li>6mm Creedmoor</li>
<li>243WIN</li>
<li>260 Rem</li>
<li>6.5 Creedmoor</li>
<li>7mm-08 Win</li>
<li>308/7.62x51 NATO</li>
<li>22 - 250 Rem (will work at a reduced capacity)</li>
</ul>
BINDER PLATE DETAILS
<ul>
<li>The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870&rdquo;.</li>
<li>The magazines without front binder plates allow a maximum cartridge overall length of 2.960&rdquo;. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below).</li>
</ul>

The MDT magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.

The MDT magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.

MDT AICS .308/6.5 Creedmoor 5 Round Metal Magazine

List on Website

Sell Item

MDT&rsquo;s Scope Base Picatinny Rails are designed to make the mounting of your optics easier. They are machined from 6061-T6 aluminum, then hard-anodized black for a durable finish.
The underside of the rails are profiled to allow the rail to be mounted flush on the receiver and to match the geometry of the ejection port.
These rails are designed with a 20 MOA incline providing additional elevation adjustment from your scope*. A recoil lug has been integrated into the underside rail profile on models where the action&rsquo;s design allows for this feature.
*Additional elevation adjustment will vary based on your scope specifications.

SPECIFICATIONS:
<ul>
<li>MIL-STD-1913 &amp; STANAG 4694 spec rails</li>
<li>CNC machined from 6061-T6 aircraft-grade aluminium</li>
<li>Mil-Spec Type III hard anodised</li>
<li>20 MOA rail</li>
<li>Integrated recoil lug**</li>
<li>SA &amp; LA options</li>
<li>Contoured for snag-free operation</li>
</ul>

MDT's CZ 457 Picatinny Rail is designed to make the mounting of your optics easier.

MDT's CZ 457 Picatinny Rail is designed to make the mounting of your optics easier.

MDT CZ 457 Picatinny Rail 20 MOA

MDT chamber flag for rimfire and centrefire in green

MDT chamber flag for rimfire and centrefire in green

MDT Chamber Flag Green

Color/Size

MDT began with two major design parameters, to redirect, or &ldquo;break up&rdquo; concussion towards the shooter, a standard pain-point in muzzle brake devices, and to reduce felt recoil as much as possible. Through 16 months of development, testing, optimizing, more testing, and then even more testing, MDT believe that we have created the most effective competition muzzle brake on the market.
COMFORTABLE SHOOTING EXPERIENC - Spend all day shooting with the MDT Comp-Brake. This muzzle brake diverts the blast away from the shooter, providing the most comfortable shooting experience by drastically reducing concussion and felt recoil by up to 67%.
SERRATED BAFFLES - The 4 baffles on each side are designed with staggered angles and serrations that causes turbulence and disperses energy. This results in greatly reduced concussion and less headaches.
SPOT YOUR TRACE - Featuring 6 top venting ports, the MDT Comp-Brake can be made to direct gas upwards at 20&deg; angles, so not only does it counteract the recoil, but it enables you to see right through the blast and keep your eye on the target.
TUNEABLE TOP PORTS - The MDT Comp-Brakes top ports can be adjusted to be more open or closed, doing so will allow you to tune your muzzle rise based on your preference or load.

The MDT COMP Brake, designed from the ground up to be the best muzzle brake for competitive shooters.

The MDT COMP Brake, designed from the ground up to be the best muzzle brake for competitive shooters.

MDT Competiton Muzzle Brake .30 cal 5/8"x24

By reducing recoil up to 66% the follow-up shot speed and accuracy is greatly improved while a straight cut through the rear baffle reduces concussive forces. MDT Muzzle Brakes are constructed out of alloy steel with a nitride finish and are provided with an overlapping lock nut. The nut offers some tuneability, as well as the ability to index the brake to make it straight. Perfect for recoil-sensitive shooters. Must be used on threaded barrels.

The MDT Elite Muzzle Brake reduces recoil helps you to spot impacts. It has 35 degree angled baffles for increased recoil reduction while keeping a more streamlined design.

The MDT Elite Muzzle Brake reduces recoil helps you to spot impacts. It has 35 degree angled baffles for increased recoil reduction while keeping a more streamlined design.

MDT Elite Muzzle Brake 30Cal 5/8X24 UNEF

Designed to allow the shooter the ability to add an additional QD mount to their forends on AR platforms and bolt action chassis systems such as the MDT ESS Chassis. This is done by attaching the M-LOK QD mount through any of the M-LOK slots present on the forend.

SPECIFICATIONS:
<ul>
<li>Mounts are made from aircraft-grade 6061-T6 aluminum and hard anodized to provide superior durability and toughness</li>
<li>Anodized aluminum QD adapter for attaching accessories to M-LOK compatible handguards</li>
<li>Machined aluminum with hard anodized finish</li>
</ul>

Anodized aluminum QD adaptor for attaching accessories to M-LOK compatible hand guards and forends.

Anodized aluminum QD adaptor for attaching accessories to M-LOK compatible hand guards and forends.

MDT M-Lok QD Sling Mount

A flat, horizontal surface aids in linear recoil and the rounded profile reduces snagging on bags and gear. Mil-Spec Type II hard-black anodized aluminum. Attaches to M-LOK compatible and legacy buttstocks.
DETAILS
Mil-spec Type II hard-black anodized aluminum bag rider that attaches to M-LOK compatible buttstocks. Designed with a rounded profile to reduce snagging on bags and gear, with 5&rdquo; of available length to sit on bags better. Angled to match the underside of MDT buttstocks and provide a flat, horizontal surface for linear recoil.
SPECIFICATIONS
<ul>
<li>Compatible with M-LOK mounting systems commonly found on buttstocks like the MDT ESS and SRS V5 (and newer)</li>
<li>Long 5&rdquo; surface to better interact with a variety of bags to allow for more in-line recoil characteristics</li>
<li>Rounded front and side surfaces to reduce snagging and catching</li>
<li>Slim profile to match up with buttstock width</li>
<li>No rear overhang to interfere with LOP or buttpad adjustments</li>
<li>6061-T6 aluminum construction</li>
<li>Mil-spec Type II hard anodized finish to stand up to repeated usage</li>
<li>Weight: 0.215lb (Aluminum)</li>
</ul>

MDT's Rear Bag Rider offers an end user an additional 5" (4" for steel version) to interface with a rear bag, or compliment multiple shooting positions.

MDT's Rear Bag Rider offers an end user an additional 5" (4" for steel version) to interface with a rear bag, or compliment multiple shooting positions.

MDT Rear Bag Rider M-lok Aluminium

MDT&rsquo;s Scope Base Picatinny Rails are designed to make the mounting of your optics easier. They are machined from 6061-T6 aluminum, then hard-anodized black for a durable finish. The underside of the rails are profiled to allow the rail to be mounted flush on the receiver and to match the geometry of the ejection port. These rails are designed with a 20 MOA incline providing additional elevation adjustment from your scope*. A recoil lug has been integrated in the underside rail profile on models where the action&rsquo;s design allows for this feature.
*Additional elevation adjustment will vary based on your scope specifications.
SPECIFICATIONS
<ul>
<li>MIL-STD-1913 &amp; STANAG 4694 spec rails</li>
<li>CNC machined from 6061-T6 aircraft grade aluminum</li>
<li>Mil-Spec Type III hard anodized</li>
<li>20 MOA rail</li>
<li>Integrated recoil lug**</li>
<li>SA &amp; LA options</li>
<li>Contoured for snag-free operation</li>
</ul>

MDT's Tikka T1x Picatinny Rail is designed to make the mounting of your optics easier.